Bluetooth Pairing - KREAFUNK AGROOVE Manuel

Operation:

1. Bluetooth Pairing

This device is built-in battery. Press and
hold on button for 3-4 seconds to start
the device, into Auto paring mode, with
the BLUE light in quick flash.
(If previous paring is failed, press
button once to enter into new searching
and pairing model with the BLUE light on
and GREEN light quick flash.)
Or press and hold on button for 4-5
seconds directly to enter into searching
and pairing model, with the BLUE light
on and GREEN light quick flash.
Use your mobile phone to search the
device" aGROOVE". If a password is
needed, then write "0000". Wait for
3-5 seconds, the pairing is successful
with the BLUE light keeps on, while the
GREEN light off.
Then you can press and hold on but-
ton for 3-4 seconds to turn off the device
after GREEN light on.
5
English