iOttie Velox Mode D'emploi page 5

02 Installing the Velox Flush
Mount
Attaching the Flush Mount
1. Choose a flat area on the vehicle's
dashboard, console, or windshield and wipe
any dust or debris from the surface.
NOTE: For vehicles with leather dashboards,
we recommend mounting on the windshield.
2. Peel off the film on the base of the flush
mount.
8 EN
3. Press the flush mount firmly onto the
desired installation location for 30 seconds.
• The adhesive base features a
semi-permanent tape. Once the mount
is removed, it cannot be re-mounted.
• When mounting, it is recommended that
the surface and product be above 40°F.
• When removing the flush mount, please
use caution. We recommend removing
slowly from the edge to avoid damage.
Mounting Your iPhone
Simply tap your MagSafe iPhone against the
mounting face and the magnets will hold it in
place. You are now ready to start driving.
9