Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
HEIGHT ADJUSTMENT
Remove the 'E' clip from the extension leg and extend all legs evenly to the desired height
ensuring you do not exceed the last punched hole of the extension leg. (see fig. 1)
Once you have achieved the desired height; reinstall the 'E' clip, ensuring that it has passed
through the extension leg and is fitting neatly and snug around the outside leg. (see fig. 2)
Never install the extension legs unevenly or slanting, this will compromise the
safety of the user.
Usage and Maintenance Instructions
3
Ver. 1 06/2013 (2639)
Publicité
Table des Matières
