Cleaning And Maintenance - VALBERG CYCLONIC-S3 Consignes D'utilisation

C

Cleaning and maintenance

Cleaning and maintenance
WARNING!
• Always unplug the unit from the mains socket before
cleaning it.
• To avoid electrical hazards, never immerse the main
unit, motorised turbo brush, AC adapter or cable in
water or any other liquids. Never rinse them under a tap.
NOTE: Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the unit.
• Detach all the tools and dust cup from the main unit before
cleaning.
• Clean the dust cup and permanent dust filter after each use.
• Main unit, motorised turbo brush and extension hose – Wipe
them with a slightly damp, soft cloth. Dry well.
• Tools – The dust cup, foam filter, permanent dust filter, crevice
tool and 2-in-1 brush tool can be rinsed under a tap or washed
in soapy water with a soft sponge.
• Shake off any excess water from the tools and allow them to
completely air dry before re-attaching them to the main unit.
• Once dried, re-attach the dust cup and filters to the main unit.
21 EN