Télécharger Imprimer la page

Publicité

Liens rapides

INSTALLATION INSTRUCTION
WS-W35114/ WS-W35118
Read all instructions before installing.
System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
When handling the xture, do not apply pressure to the LEDs. Hold the xture by the base only.
Retain installation instructions for future maintenance reference.
All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or
accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by dweLED could
result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
Coastal conditions may cause mineral and residue build-up on the xture. We recommend that customers in coastal
areas clean all external surfaces of the xture once every two weeks with a wet cloth.
Pour éviter tout choc électrique, assurez-vous que le disjoncteur soit mis hors tension avant de commencer.
Lisez toutes les instructions avant l'installation.
Le système doit être installé par un électricien licensié conformément au code national de l'électricité (NEC), et également aux
règlements locaux.
Lors de la manipulation du luminaire, n'appuyez pas sur les LED. Tenez-le uniquement par la base.
Toutes les pièces doivent être utilisées comme indiqué dans ces instructions. Ce produit est conçu pour être utilisé seulement
avec les pièces et/ou accessoires fournis pour être utilisés avec les produits dweLED. Remplacer des pièces ou accessoires non conçus pour ce
produit dweLED pourrait causer des dommages corporels ou matériels et pourrait également causer l'annulation de la garantie. Veuillez
contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
Les conditions côtières peut causer une accumulation de minéraux et de résidue sur le luminaire. Nous recommendons
aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes les deux semaines avec
un chi on humide.
A
Wire Connector
Qty: 3pcs+1Extra
Phone (800) 526.2588
44 Harbor Park Drive
Fax
(800) 526.2585
Port Washington, NY 11050
B
Mounting Screw
Qty:1 extra
1600 Distribution Ct
Lithia Springs, GA 30122
C
Qty: 1
1750 Archibald Avenue
Ontario, CA 91760
1

Publicité

loading

Sommaire des Matières pour WAC Lighting WS-W35114

  • Page 1 INSTALLATION INSTRUCTION WS-W35114/ WS-W35118 • Read all instructions before installing. • System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations. • When handling the xture, do not apply pressure to the LEDs. Hold the xture by the base only.
  • Page 2 INSTALLATION INSTRUCTION WS-W35114/ WS-W35118 1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar. 2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.

Ce manuel est également adapté pour:

Ws-w35118