Télécharger Imprimer la page

DU-HA DU-HOOKY Consignes D'installation Et Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

PART #70088
DU-HOOKY
Installation and Operational Instructions
Tools Required:
// 5/16" Socket // Drill or Impact Wrench
Installation Instructions:
Secure the mounting clip (Item B) to a convenient location in the bed of your pickup
1
truck using a 5/16" socket to secure the hex head self drilling screws (Item C).
We recommend installing over the wheel well as shown. The clip should not be more
than 18 inches from the end of the handle.
Note: You can also attach the mounting clip (Item B) to a wall in your shop or garage
to keep the DU-HOOKY (Item A) within reach at all times.
ITEM
QTY DESCRIPTION
1
DU-HOOKY
A
1
Mounting Clip
B
2
Hex Head Self Drilling Screws
C
Operational Instructions:
Length Adjustment
2
Twist the DU-HOOKY (Item A) shaft 1/4 turn counterclockwise, then pull to extend the
DU-HOOKY (Item A). Twist the DU-HOOKY (Item A) shaft 1/4 turn clockwise to tighten
at desired length.
Tip
3
Slide tip under the item you're trying to retrieve, then turn the DU-HOOKY (Item A) all
the way to the side, (so the front edge of the tip catches the lip of the bucket) then
pull the DU-HOOKY (Item A) towards you, to retrieve items. This works great for
getting underneath and hooking into cardboard boxes, the bottom of buckets, and
anything else you can't get the hook around.
Set Screw
4
To re-position the tip, loosen the set screw using a screwdriver, then turn the tip to
the desired position, and re-tighten the set screw. Do not over-tighten.
Note: Tip turned sideways or in its original position works great for hanging plants
and holiday decorations. Turned 180 degrees, it makes a good hook for retrieving
duck decoys and lines.
Handle
5
Remove the end cap from the handle by twisting the end cap counterclockwise. This
will reveal the threaded connector. The ice scraper accessory can be attached to
the threaded connector. Many other standard items with a female connector, such
as a paint roller, squeegee, or duster, can also be attached to the threaded connector.
phone: 1.866.306.DUHA (3842) // fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537
Manufactured by DU-HA, Inc. // www.du-ha.com
1
C
B
2
A
3
Tip
A
4
Set Screw
End Cap
5
ENGLISH
A
Tip

Publicité

loading

Sommaire des Matières pour DU-HA DU-HOOKY

  • Page 1 DU-HOOKY (Item A). Twist the DU-HOOKY (Item A) shaft 1/4 turn clockwise to tighten at desired length. Slide tip under the item you’re trying to retrieve, then turn the DU-HOOKY (Item A) all the way to the side, (so the front edge of the tip catches the lip of the bucket) then pull the DU-HOOKY (Item A) towards you, to retrieve items.
  • Page 2 Fabricado por DU-HA, Inc. // www.du-ha.com Teléfono: 1.866.306.DUHA (3842) // Fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537...
  • Page 3 Mode d’emploi : Ajustement de la longueur Faire faire ¼ de tour dans le sens antihoraire à la tige DU-HOOKY (article A), puis la tirer Déverrouiller pour étirer DU-HOOKY (article A). Faire faire ¼ de tour dans le sens horaire à la tige DU- HOOKY (article A) pour la serrer selon la longueur désirée.

Ce manuel est également adapté pour:

70088