VR46 MOTOR BIKE-X Manuel D'utilisation page 9

Model Reference picture
Motorbike-X
Steps to be carried out after taking the product out of its packaging:
• Install the front wheel
• Install the handlebar
• Install the plastic covers
• Check the tyre pressure (see side of tyre for recommended value).
CAUTION
Assemble the item correctly.
Before using the vehicle, be sure to have correctly assembled the vehicle parts and checked the operation of the electronic system:
• Front wheel: Check the tightening and the stability
• Handlebar: Check the tightening and the stability
• Platforms: Check the stability of the stand and of the platforms
• Brake lever: Check the operation of the brake (chapter 7)
• Saddle: Check the height and stability of the saddle
• Electronic system: Check the operation of the vehicle (chapter 5)
In the package
08
Indications
4. Black plastic covers:
Bring the black side covers closer and
insert them, taking care to respect the
correct direction (see picture); insert
the screw and tighten it as required.
5. Yellow plastic covers:
Bring the yellow ring cover closer and
install it, aligning it with the frame
(see picture). Repeat the operation on
the opposite side.