Nespresso Momento 120 Mode D'emploi page 21

5
Insert the water tank back to the
machine.
8
Insert the cleaning tank. The inden-
tation on the cleaning tank lid must
be on the front left side for correct
insertion.
10
After the cleaning process has finished,
remove the drip tray with the drip grid
from the machine. Empty the drip tray.
Wash with soapy water, rinse and dry
both elements. Insert the drip tray with
the drip grid back to the machine.
6
Remove the drip tray with the drip
grid from the machine. Empty the drip
tray. Wash with soapy water, rinse
and dry both elements. Insert the drip
tray with the drip grid back to the
machine.
Make sure the milk suction pipe is
properly placed into the cleaning
tank.
11
Remove, empty and clean the water
container. Remove the cleaning tank,
remove the lid, empty the tank and
clean both lid and cleaning tank.
Handle the cleaning tank with care
7
Place the cleaning tablet in its
forseen position in the cleaning tank.
If cleaning tablet is not inserted, the
cleaning procedure cannot be started.
9
Place the waste water container
below the outlets. Let the fridge door
open (to avoid condensation in the
milk tank bay).
Select "proceed" to launch the
cleaning procedure and follow
the instructions on the screen.
as the cleaning solution is warm and
composed of cleaning agent.
EN . 19