Technical Specifications; Spare Parts; General Safety Rules - EGAmaster 60256 Manuel D'instructions

TECHNICAL SPECIFICATIONS

- CAPACITY ................................................355
- DIMENSIONS OF CUTTING WHEEL........355x3x25,4 mm
- MOTOR....................................................1650W (230V/50-60 Hz or 110V/50-60 Hz)
- CUTTING CAPACITY............................... 255x406x127 mm
- SPEED................................................3500 R.P.M
- WEIGHT...............................................21 Kg. including table
Note: The Brick cut-off machina does not include the cutting wheel
WARRANTY
The manufacturer guarantees the customer of this machine a total warranty of 12 months on
manufacturing defect pieces.
This warranty does not include those pieces that, due to a normal use they get worn.
NOTE: For getting the mentioned warranty, it is absolutely necessary to send the "Warranty Certification"
fulfilled to The manufacturer within the 7 days after the purchase date.

SPARE PARTS

For ordering the needed spare parts, please ask us for the corresponding codes and also inform us about
the Serial Number of the machine.

GENERAL SAFETY RULES

- Be sure that the motor is in OFF position before plugging the machine to the power supply.
- Use face mask and goggles.
- Wear safety shoes with anti-slippery soles.
- Do not wear loose clothes.
- Be sure that the electric socket-outlet where the machine is connected to is grounded (3-pronged
ground type socket).
- Use only original accessories and parts. Using non original accessories and parts may be hazardous.
- Disconnect the machine from the power supply before starting any maintenance or adjustment
procedure.
- Remove any strange/foreign object before starting the machine.
- Always keep hands and fingers away from the wheel when the machine is working.
- Never hold the workpiece by hand when the machine is cutting.
- Keep the floor around the machine clean and free of oil, grease or scrap material.
- Always keep machine and blade clean for getting the safest and best performance.
- Keep the motor away from water of too humid conditions.
NOTE: The not respecting of these safety rules may result in serious injury.
11 Kg. without table
- 2 -