Chauvet Professional STRIKE SABER Guide De Référence Rapide page 4

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
Menu Map
Main Level
DMX Address
DMX
Personality
Red Shift
Fixed Color
Static
Manual
Color Mixer
Auto Show Auto 1–6
Master/Slave
Dimmer Mode
LED
Frequency
Back Light
Fixture
Hours
Information
Version
UID
Reset Factory
3
QUICK REFERENCE GUIDE
Programming Levels
001–512
1Ch
3Ch
7Ch
11Ch
20Ch
27Ch
On
Off
Amber
White
Amber&White
Amber
0–255
White
1–100
Master
Slave
Off
Dimmer 1–3
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
10S
30S
2min
Always On
<_ _ _ _H>
<V_._>
<_ _ _ _ _ _ _ _ _ _ _ _>
No
Yes
Description
Selects DMX address (highest channel restricted to
personality chosen)
1-channel: dimmer
3-channel: dimmer, strobe, red shift
7-channel: 16-bit dimmer, strobe, auto programs, auto
speed, red shift, dimmer speed
11-channel: 10-cell dimmer, red shift
20-channel: 10-cell 16-bit dimmer
27-channel: 10-cell 16-bit dimmer, strobe, auto programs,
auto speed, red shift, dimmer speed
Turns on or off Red Shift (Amber LEDs imitate lamp when
dimming
Amber
White
Amber and white
Combine amber and white to make a custom color
temperature
Selects automatic programs and program speed
DMX mode (Master)
Slave mode
Linear dimmer
Dimming curves Dimmer 1 (fast) to Dimmer 3 (slow)
Sets the PWM frequency
Turns off display backlight after 10 seconds of inactivity
Turns off display backlight after 30 seconds of inactivity
Turns off display backlight after 2 minutes of inactivity
Display backlight always on
Shows total hours the product has been powered on
Shows current firmware version
Shows product UID
Resets the product to factory default settings
STRIKE Saber QRG Rev. 4