Hathaway PAR 5 GOLF TRAINING NET SYSTEM Instructions De Montage page 4

THANK YOU! ASSEMBLY INSTRUCTIONS
1. Assemble base frame (B) pieces together as shown to make one piece like image on right.
2. Assemble net poles (C) as shown to make one piece.
4. Insert net poles in back corners of
base frame (B)
8. Place net in the desired location and ensure
it is on level ground. Secure frame with included
ground stakes (D).
NOTE: Care should be taken when pressing in
the ground stakes. Base legs can be bent if
driven too far into the ground on hard surface.
NOTE: Net assembly must be used on a flat soft surface such as grass or soil to be anchored.
WARNING: Ensure frame is securely fixed to ground before use,
5. Lift up the front of the net (A),
using the black tabs in corners,
and hook the tab over net pole
(C) top ball, as shown, while
flexing pole.
3. Slide one net pole (C) through large
blue tabs on each side of net (A), and...
6. Attach bottom corners of net
(A) to front of base frame (B)
using loop hook as shown.
as loose ground stakes may cause
7. Use bungee cords (F) to
secure net (A) to base frame (B)
injury.
4