Bemma MONTAUK Mode D'emploi page 3

S T E P 1
S e c u r e V a n i t y t o W a l l
1. Place the vanity in the desired location
2. Using the stud finder and marker, locate and mark the studs
behind the wall
Important: if the studs do not line up for your vanity, wood blocking
can be installed between studs
3. Ensure the vanity is level. Adjust floor levelers at bottom of foot
Note: adjustments are sometimes needed due to uneven flooring
4. Secure the vanity to the wall using wood screws (not provided)
Locate wall studs and
use this rail to secure
vanity to the wall
1 (833) 66 BEMMA
customercare@bemmadesign.com