Publicité
Les langues disponibles
Les langues disponibles
Basic Menu Settings
When the Visualizer is switched on for the first time, basic settings should be
performed by accessing the on-screen menu (gear symbol). Use the built-in
touch screen to navigate through the menu.
Some of the most important settings are :
Ethernet Settings
Setup the network interface according your infrastructure.
Time Settings
Set time and date.
Manuals, Firmware, Apps, Software, Dimension Drawings,... @ www.wolfvision.com /SUPPORT
Accessories
The Visualizer can be equipped with an infrared remote control, a lightbox, and with dry-erase
working surfaces for quick annotations during a presentation.
This Visualizer is not automatically supplied with a remote control. If you wish to use the
remote control, please check our homepage, or use the direct link https://bit.ly/3RoAH9I for
further details.
For dry-erase working surfaces, lightboxes, and other accessories, please contact your
WolfVision dealer.
Authentication - Password Protection
The built-in touch screen and the web-interface of the Visualizer can be accessed without any
credentials.
System relevant topics in the settings of the on-screen menu are password protected.
The default password of the accounts is: "Password" (case sensitive). In case you change this
password, we recommend to write them down below:
In case the user-defined administrator password is lost, please contact your WolfVision dealer
or WolfVision support.
ENGLISH
Publicité
