Basic Operation; Loading And Playing A Disc; Setup - Koss KS5429-2 Manuel Du Propriétaire

G. Basic Operation
POWER
OPEN
PLAY
PAUSE
NEXT
PREVIOUS
LEFT/RIGHT/UP/DOWN
MENU

SETUP

HOLD
H. Loading and Playing a Disc
1. After connecting power to the unit, turn on the DVD player. The
power indicator will light up.
2. Open the disc tray by sliding OPEN, and place a disc into the tray
with the label side facing up.
3. Close the tray. The unit will load the disc and start playing.
4. Adjust the BRIGHTNESS and VOLUME controls.
5. To stop the disc press and hold the PLAY/PAUSE button for about
3 seconds when the disc is playing.
Turn the unit on or off.
Load or remove the disc.
Play or execute item or setting.
Pause.
Go to the next chapter, track, or scene
during playback.
Go back to the previous chapter, track,
or scene during playback.
Menu navigation.
Display the main menu of the disc.
Display the setup menu to select and set item,
and to exit the setup menu.
Lock keys.
8