Publicité
Les langues disponibles
Les langues disponibles
Declaration of conformity and FCC statement
1. Declaration number
2. Unique identification code of the product
3. Type
4. Product description
5. Manufacturer
Developed, designed and manufactured with the essential requirements by safe and security of the European Directive(s) and
Regulation(s):
2004/108/EC
2011/65/EU & 2015/863/EC
The partly completed machinery is developed, designed and manufactured with the essential requirements of the following
standards:
EN 61000-6-1:2002 - Part 6-1
EN 61000-6-2:2005 - Part 6-2
EN 61000-6-3:2002 - Part 6-3
EN 61000-6-4:2002 - Part 6-4
FCC cuation and statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the part responsible for compliance could void the user's
authority to operate the equipment. This equipment complies with FCC exposure limits set forth for an uncontrolled environment.
"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help."
This declaration of conformity is established under the sole responsibility of the manufacturer identified in point 5.
Signed for and on behalf of the manufacturers by:
Authorised person:
Karel Kleinmond
Group Operations Director
2019-01-21 Karlovarska, Czech Repulic
1001
FTMU
Ultrasonic device
Measuring and communicating air flow and temperature
Lindab Ventilation AB
Stålhögavägen 115, 26982 Båstad, Sweden
Telephone +46 431 85000, www.lindab.com
Electromagnetic Compatibility Directive (EMC)
Restriction of Hazardous Substances (RoHS)
Generic standards - Immunity for residential, commercial and light-industrial environments
Generic standards - Immunity for industrial environments
Generic standards - Emission standard for residential, commercial and light-industrial
environments
Generic standards - Emission standard for industrial environments
lindab | we simplify construction
Publicité
