Bluetooth - Tangent Danmark LS-20 Manuel D'utilisation

The controls (EN)
Power Input (1)
DC in – Connect with provided Power Adaptor(12V/2A)
AUX IN (2)
Use this input to any player with analog line-out, for instance MP3 players and alike.
Status indicator (3)
Indicates the power state and source selected
No light
Blue
Blue flashing
Red
When AUX is plugged, the front LED (RED) will be solid on. The Bluetooth and AUX can play music at same time, and
you will hear a mixed signal.
On/Standby (4)
Press this button to switch the system ON or into Standby. Please note that applying a signal from either Bluetooth or
analog line-in, will always wake up the system automatically. When there is no BT connection or AUX signal, product
should power down itself after 20 min.
Standby consumption, (Auto Power down): <0.5W.
Volume down/Volume up (5)
Press "Vol-" button to turn the master volume down. Press "Vol+" button to turn the master volume up.
To connect your mobile device or PC to the Tangent LS 20 Sound system using Bluetooth you first need to pair the
devices. Please see the user guide of your device for how to pair.
Pairing with Bluetooth Device
Bluetooth Speaker can pair with most Bluetooth devices. Pairing may vary by device. Consult your Bluetooth device's
owner's manual for pairing instructions.
Press "Standby" button to switch on the unit
Turn ON your Bluetooth device (e.g. Smart Phone) setting, "Tangent LS20" would be shown at your device Bluetooth
list.
Connect your device to the BT Speaker with Bluetooth, your device menu would show "Connected", the Bluetooth LED
would keep ON solid when pairing success.
You can play your music wirelessly with the BT Speaker.
*Operating range of Bluetooth audio is up to 10 meters.
(Measured in open space. Walls and structures may affect range of device.)
Error state
The LS-20 speaker is equipped with protective circuit will turn off the speaker if it overheats or shortcuts. The speaker
will automatically leave protective mode when possible.
Tangent A/S Birk Centerpark 40 DK-7400 Herning, Danmark
- Standby or no mains
- Bluetooth source selected
- Bluetooth pairing
- Aux-in source selected

Bluetooth