Initial Screen - LG PQNUD1S00 Manuel Du Propriétaire Et D'installation

Installation
• You can select the option for indoor address selection mode only when
Master / Slave is selected.
• You can distribute the using power to maximum of 48 indoor units.
(When showing the stand by power, maximum of 47 indoor units.)
Ex 1) Distribution of using power to 64 indoor units
(central control address 00-2F)
* NOTE 2) : When operating in connection to the PC central controller, the range of the indoor address
setup (Start – End) on the power indicator is from 00 to 7F.
The Start and End address of the power indicator refers to the first and last address of the
indoor unit group.
Ex) Indoor address "72", "73", "74", "75" ➠
Start address: 72 End address: 75.
- Press the Menu key to save the remote reading service ID and return to the initial screen
16 Electricity Distribution Indicator
All manuals and user guides at all-guides.com
Press the Shift key to enter the
indoor selection mode
LGAP
( S t a r t ) - >
( 0 0 ) - >
( S t a r t ) - >
( 0 0 ) - >
( E n d )
( 2 F )

Initial Screen

( E n d )
( 0 0 )