Preparation; Care And Maintenance - Uberhaus 38115159 Guide De L'utilisateur

PREPARATION:

Required for Assembly:
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Arrange 4 or more manpower when assembling or moving the product. Estimated Assembly Time: 15 -
30 minutes.

CARE AND MAINTENANCE :

• Our steel components for sun shelter and garden accessories are treated with rust inhibiting paint that
protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur if these
protective coatings are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratch or damage occurs, we recommend immediate touch-ups with
rust inhibiting paint. Surface rust can also be easily removed with a very light application of regular
cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation
may start dripping onto the deck or patio and caused damaging stains, which may be difficult to remove.
This can be prevented if the above-mentioned measures are taken to keep the product from oxidizing.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
• Keep the original packaging to store the sun shelter.