Setup Instructions; Set-Up And Take-Down Instructions - Eskimo Sierra Mode D'emploi

SETUP INSTRUCTIONS

1
To set up your new Eskimo flip shelter first make sure the
skin is not tangled or pinched in anyway as this will prevent
the framework from being able to extend fully.
2
Starting at the front side of the shelter, locate the bottom
framework, and slowly extend this assembly out until an
audible "click" is heard, notifying you the framework is
locked in the extended position.
3
Zip open the front door of the shelter and move inside,
at the same time gently extending the next framework
until the "click" is heard. Repeat this step until the
remaining framework assemblies are fully extended
and the shelter is deployed.
TIP: At this point the shelter is usable as the spreader
poles are not necessary when the skin has been properly
attached as described earlier in this manual. Spreader
poles are to be used in inclement weather conditions.
WIND BLOCK POSITION
The Front #27729 or rear #27730 adjustable spreader poles
can be used to create a partially open shelter position that
works will in blocking "light winds" on otherwise nice fishing
days. SEE FIGURE 18
10
TAKEDOWN INSTRUCTIONS
1
2
3
Check for parts online at www.GetEskimo.com or call 800-345-6007 M-F 8-5 CDT
Operator's Manual | Flip-Style Sled Shelter
25300 Sierra™
Takedown requires the same process used to deploy
the shelter except in reverse. Be sure to close all
window covers to prevent tearing or tangling of this
excess fabric with the framework.
Be sure to carefully fold all loose shelter skin inward to
prevent any tearing of the fabric. Damage to the skin
should be expected if the skin is not properly stowed
prior to travel.
Using the framework you should be able to "tuck" each
skin section in between the pole assemblies, locking it
in place, and safely containing the skin within the sled.
TIP: When hauling large amounts of gear, it will be easier to
collapse the sled and correctly pack the skin first before all gear
is repacked into the sled. With increased use, each user will
develop their own way of packing that is easiest for that person.
|
25250 Sierra™ Thermal