Télécharger Imprimer la page

Cisal ZS 027110 Instructions D'installation Et Entretien page 4

Publicité

Pulsantiera accensione luci
Remote control light switch
Commande murale pour allumage lumières
Cavo Led 12Vac (5 mt.)
Led cable 12 Vac (5 mt.)
Câble LED (5 mt.)
Cavo pulsante Led
Led button cable
Câble bouton LED
12Vac (0,20 mt.)
PRESA ACQUA
WATER FEED
SORTIE EAU
Per tutte le versioni dei soffioni è necessaria l'installazione di un interruttore ON/OFF sull'alimentazione del trasformatore.
All false ceiling shower heads require installation of control key for switch on/off lights on transformer power supply.
Pour toutes les versions de plafonds de douche à encastrer à faux-plafond il faut installer un interrupteur marche/arrêt sur l'alimentation du
transformateur qui vient fourni avec le produit.
All'interno delle zone ZONA 0 - ZONA 1 - ZONA 2 NON DEVE ESSERE MAI PRESENTE LA TENSIONE 220V
ELECTRICAL CURRENT AT 220 V MUST NEVER BE PRESENT within areas 0 - 1 - and 2
Dans les zones ZONE 0 - ZONE 1 - ZONE 2 Ne doit en aucun cas être présent la tension 220V
Collegamento elettrico / Electrical connection / Branchement électrique
Posizionare 1 Trasformatore all'esterno della zona 2 (nella zona 3)
Place the current transformer outside area 2 (inside area 3)
Installer 1 Transformateur à l'extérieur de la zone 2 (dans la zone 3)
Alimentatore: Non installare
nelle zone 0, 1 e 2
Feeder: do not install in the
areas 0, 1 and 2
Source d'alimentation : NE PAS
installer dans les zones 0, 1 et 2
F
BOX CROMO 9
Cavo Entrata 220Vac (0,20 mt.)
Input Cable 220Vac (0,20 mt.)
Câble entrée 220V (0,20 mt.)
interruttore per alimentazione. Non in dotazione.
Light ON/OFF switch. Not provided.
Interrupteur pour alimentation. Non fourni.

Publicité

loading

Produits Connexes pour Cisal ZS 027110

Ce manuel est également adapté pour:

Zs 027120