LEGRAND In One Sagane 845 22 Guide Rapide page 10

Actor of a scenario
– Automatic switch with switch (Leader)
Step 1: start the learning (on LEADER)
Press LEARN
Step 2: add an automatic switch to the scenario (on the ACTOR)
Press LEARN
Step 3: save the scenario (on the LEADER)
– Automatic switch with scenario switch / interface scenario (Leader)
Step 1: start the learning (on LEADER)
Press LEARN
Step 2: add an automatic switch to the scenario (on the ACTOR)
Press LEARN
Step 3: save the scenario (on the LEADER)
Automatic leader switch of a scenario
Step 1: start the learning (on LEADER)
Press LEARN
Note: Two automatic switches can be used as a two-way switch, in which case
one must be the LEADER of the other and vice-versa.
Press LEARN
Press the control
button to be linked
to the leader
Press LEARN
Press the
control button
Press the control button
that pilots the scenario
Press the ON button
(OFF is learned automatically)
Indicator lights on all products switch off.
The scenario has been saved.
Press the control button
that pilots the scenario
on ON
or
Press three times = automatic mode
on OFF
Press three times = automatic mode
Indicator lights on all
products switch off.
The scenario has been saved.
Press ON for a
standard scenario
or
Press OFF for a
timed scenario
(Actor products return to their
pre-scenario start setting
when the automatic switch
timing is over)
10
Press once = Timed ON
(Timing of the product)
Press twice = Manual ON
(Switch-on activated by
movement detection)
Press once = Timed OFF
(Timing reactivated
by movement detection)
Press twice = Manual OFF
(Switch-on activated by
movement detection)
Complete steps
,
and
same way as for the
learning phases above;
if several products are
to be added to the scenario,
repeat operations
and
in the
for each actor.