Castel XELLIP Serie Mode D'emploi page 15

AUDIO VIDEO IP 10PB/CLAV READER DOOR ENTRY STATION
INSTALLATION
Flush mounting
Create a recess 476 mm high, 140 mm wide and 61 mm deep in the support.
Mount the base in the recess then connect the entry station.
Attach the front panel with the 10 FX teat screws (TORX) M3-10.
WARNING!!! Do not embed the bottom too deeply because when mounting the front panel, the seal of the latter
would no longer be in contact with it. This causes a rupture of the seal.
Technical data sheet no. 604-0404D www.castel.fr
FR
EN
Page 15 / 22