Installation Instructions - Drive Medical RTL12000 Mode D'emploi

installation instructions

WEIGHT CAPACITY: 300 LBS (136 KG)
1. Detach seat by first removing toilet seat bolts.
2. Place the rail mounting flange on the toilet and
align the holes. Ensure tube on bracket is closest
to the tank. (Fig. 1)
3. Place toilet seat and align holes. (Fig. 1)
4. Insert bolts through toilet seat and bracket using
original nuts and secure.
5. Assemble safety frame by inserting short tube
into arm tube as shown in Fig. 2.
6. Slide assist rails into bracket and secure them with
built-in snap buttons. (Fig. 2)
7. Set rail to desired width and height using the
built-in snap buttons. Make sure all built-in snap
buttons are secured before use of product.
Rev.3.07.28.14
Item # RTL12000
Fig. 1
Fig. 2