Operation; Cleaning And Maintenance; Daily Maintenance - Drive Medical Davy le Caneton MQ2400 Instructions D'utilisation

4.

OPERATION

1. Place the humidi er body horizontally at a suitable place.
2. Remove the top by lifting straight up, and overturn the water tank. Screw
o the tank cover, and pour in cooled water. Distilled water is recommended
for best results. Replace the tank cover tightly to avoid leakage, and reposition
the water tank back onto the base of the humidi er.
3. Connect the unit to power supply, turn on the power switch and the
humidifying indicator lights will be illuminated.
4. There is no automatic adjustment of humidifying output, which is set to the
dryness of your room.
5. When there is no water in the water tank, the built-in safety device will
disconnect the atomization circuit automatically. The output from the spray
nozzle will stop and the water depletion indicator will illuminate (two colors
of the same indicator). To continue the operation, turn o the humidi er
and unplug the unit. Add water into the water tank, and reassemble the
water tank and humidi er body. Plug the humidi er back in and set to
desired mist output.
5.

CLEANING AND MAINTENANCE

It is important to keep your ultrasonic cool mist humidi ers clean. Cleaning
and disinfecting on a regular basis is important for maintaining the performance
of your humidi er.
IMPORTANT: Do not leave water in the water tank when unit is not in use as it may result
in the buildup of mineral deposits and bacteria that can inhibit performance e ciency and
operational longevity of the humidi er. If water remains in the water tank for extended
periods, bacterial growth is possible.

Daily Maintenance

1. Always turn o and unplug the humidi er from the outlet before cleaning.
2. Empty water from the water tank and water basin daily.
3. Wipe and dry water basin with a clean, dry cloth or paper towel.
4. Replace the water tank.
5