Operation - Honda Power Products HBC550W Notice D'utilisation

OPERATION

EN
HOW TO CHARGE THE BATTERY PACK
WARNING:
conditions. Water entering the charger will increase the risk of electric shock.
NOTICE:
Lithium-Ion battery packs are shipped partially charged. Before using it
the first time, fully charge the battery pack.
1. Connect the charger to the power supply (220-240V~, 50Hz). The four
charging indication LEDs will briefly shine green, indicating that the charger is
working correctly.
2. Align the raised ribs of the battery pack with the
mounting slots in the charger; slide the battery
pack down onto the charger (Fig. 2).
3. The charger will communicate with the battery
pack to evaluate the condition of the battery pack.
4. When the battery pack is charging, the four
charging indication LEDs on the charger will shine
green in sequence, from left to right, to indicate
the charge level; please refer to Fig. 3. The power
indicator on the battery pack will flash in sequence:
red, orange and green. The fan in the charger
continuously works to cool the battery pack.
5. When the battery pack is fully charged, the
charging indication LEDs stop alternating and will
shine green continuously. The power indicator
on the battery pack will go out. Wait until the
cooling fan stops, remove the battery pack from
the charger and disconnect the charger from the
power supply.
6. The battery pack will fully charge if left on the charger, but it will not
overcharge. If the battery pack remains on the charger for one month or
more, it will perform self-maintenance and drop to 30% charge capacity. If this
occurs, reinstall the battery pack on the charger to recharge it fully.
12
EN
Do not use the charger outdoors or expose it to wet or damp
FAST CHARGER — HBC550W
2
3
LED 1 LED 2 LED 3 LED 4