Rohe SUPROAC19002 Manuel D'utilisation page 33

PUNCTURE
You can fix small punctures thanks with PVC leaves include on repair kit, you should buy
PVC glue supplied. Check that your Stand-Up Paddle board is deflated and flat.
Soapy water is useful to notice a leak.
Cut a flexible PVC patch
•
Clean the damaged area and the patch surface needed to be glued.
•
Cut a round patch of 5 cm bigger than the surface to fix.
•
Apply one layer of glue for PVC on the patch and another one on the damaged
area.
•
Strongly press on the patch for 1 minute.
•
Let it dry for about 24h before inflating your board and verifying the fixation
quality.
WARNING:
Do not inhale glue vapours. Do not ingest. Avoid eyes or skin contact with the glue.
Keep you repair kit away from children.
Strongly press on the patch for 1 minute
Apply one layer of glue on the patch and on
the damaged area
32