Care And Maintenance; Cleaning The Brushes; Replacing The Brushes - Bar Maid GP-100 Manuel D'utilisation

Masquer les pouces Voir aussi pour GP-100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND MAINTENANCE

CLEANING THE GLASS POLISHER EXTERIOR
1.
Ensure glass polisher is OFF and unplug power cord from the outlet.
2.
Clean external surface of glass polisher daily using a dampened sponge. Do not immerse glass washer in water or spray
with water.
3.
Dry the surface with a soft cloth.
4.
Clean lint screen on bottom of polisher weekly.

CLEANING THE BRUSHES

1.
Ensure glass polisher is OFF and unplug power cord from the outlet.
2.
Remove brushes by rotating each brush counter clockwise and pulling upward.
3.
Wash brushes with mild laundry detergent and rinse well.
4.
Use hands to squeeze as much water out of brushes as possible.
5.
Insert short brush onto center post of the base.
6.
Insert remaining brushes onto outer posts.
7.
Plug power cord into a grounded outlet.
8.
Press ON/OFF button to turn glass polisher ON. The air blower will dry the brushes in a few minutes.
9.
Press ON/OFF button to turn glass polisher OFF when finished or not in use.

REPLACING THE BRUSHES

1.
Ensure glass polisher is OFF and unplug power cord from the outlet.
2.
Remove brushes by rotating each brush counter clockwise and it pulling upward.
3.
Insert short brush onto center post of the base.
4.
Insert remaining brushes onto outer posts.
LIMITED WARRANTY
Bar Maid provides a 1 Year Limited Warranty from the date of purchase covering defects in materials and workmanship
(except polishing brushes). In the unlikely event that you have a problem with your Glassware Polisher, call our Customer
Service line at 954-960-1468 with the description of the problem. We will then tell you how to fix the problem, or direct
you to the Factory Authorized Service Center nearest you.
This warranty does not cover accidental damage, damage caused by abuse, damage caused by use contrary to
the operating instructions or damage caused by using the machine for a purpose other than for what it was intended.
This warranty is limited only to the cost of repairing or replacing the warranted equipment, at Bar Maid's discretion.
The warranty card must be returned within 21 days of purchase to validate this warranty.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gp-100-ceGp-3 miniGp-3 mini-ce

Table des Matières