Level Adjustment; Power Supply Connection; Use; Quick Start - Qilive Q.6152 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.5

Level adjustment

The appliance must be perfectly level to ensure safe and proper operation. Once in its permanent operating
position, check that the tumble dryer is completely level using a spirit level. If it is not, adjust the feet with a
proper tool.
4.6

Power supply connection

1.
Make sure that the voltage of the power supply is the same as the electric specification.
2.
Do not connect the dryer with the power connection board, a universal plug, or socket, do not use multi-plug
adapters and extension cables.

5. USE

Note: This appliances contains flammable refrigerants R-290 (A3). Ensure that the system and the pipes are not harmed during
operation and handling.
5.1

Quick start

Note: Prior to use, ensure the tumble dryer is installed properly.
1.
Before drying
1
Plug in to the mains electricity supply.
2.
Drying
Turn the appliance on.
Select a programme.
3.
After drying
Note: After finished drying, the buzzer will beep and the display will show "0:00".
Open the door and take
Pull out the water
the laundry out from the
container.
drum.
Note: If the socket with a switch is used, please press the switch to turn off the power directly.
5.2
Before each drying
Notes:
Leave it to stand for 2 hours after transporting. Before first use, clean the inner drum with a soft cloth.
1.
Put some clean rags into the drum.
2.
Plug the mains plug, then press and the
3.
Select the <Refresh> programme, and press the
4.
After finishing this programme, refer to the "maintenance and cleaning" section to clean the lint filter.
During drying, the compressor and the water will generate some noise which is perfectly normal.
1.
Before drying, thoroughly spin the laundry in the washing machine. High spin speed shortens the drying time and saves energy.
2.
For uniform drying results, sort the laundry according to fabric type and select the appropriate drying programme.
3.
Before drying, please close zips, hooks and eyelets, buttons, tie fabric belts, etc.
4.
Remove all objects from pockets such as lighters and matches.
5.
Sew in or remove under wiring from bras.
6.
Close duvet covers and pillowcases to prevent small items from being rolled up inside them.
7.
Leave jackets open and undo any long zips so that textiles dry evenly.
8.
Do not over dry the clothes, because over-dried clothes can easily get creases.
9.
Do not dry the articles containing rubber or similar elastic materials.
10.
Keep the area around the tumble dryer clean. Coal dust or flour may cause an explosion.
11.
The door shall be opened only after the programme of the tumble dryer is finished to avoid being scalded by hot steam or an
overheated drying machine.
12.
Clean the lint filter and empty the water container after each use to avoid extension of drying time and increase in energy
consumption.
13.
Do not dry clothes after dry-clean process.
Load the laundry into the drum.
Select a function or default.
Pour out condensate
water.
On/Off button.
Start/Pause button.
9 9
Close the door.
Start.
Disconnect the tumble
Clean the lint filter.
dryer from the mains
electricity supply.
EN

Publicité

Table des Matières
loading

Table des Matières