Jole every stage Manuel D'instructions page 10

4. While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely. 23
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
!
Please check by moving the child
restraint back and forth.
The assembled safety belt is shown as
!
Shoulder belt passes through Lock-off Device, as
!
Waist belt passes through the back slots, as
!
The vehicle buckle tongue is engaged with the buckle correctly,
-3
as
24
24
ii. Securing your Child in the Child Restraint
Use Body Portion
!
When installing the child restraint in the toddler mode, do not use the infant
insert.
15
23
24
-1
24
-2
24
1
2
3
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
child restraint.
25
2. Press the red button to disengage
the buckle.
26
3. Place the child in the child restraint
and engage the buckle.
4. Pull down the adjustment webbing
and adjust it to the proper length so
that your child is snugly secured.
!
After the child is seated, recheck
whether the shoulder harnesses
are at proper height.
!
Make sure the space between the
child and the shoulder harness is
about the thickness of one hand.
25
26
27
27
16