Living 043-7021-6 Guide D'utilisation page 5

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse.
4. Risk of fire. Replace fuse only with 2.5 A, 125 V fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. Risk of fire. Do not replace attachment plug. It contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Note:
1. Do not force the fuse when replacing to reduce the risk of damage.
2. If the fuse is difficult to insert, please ensure it is aligned correctly.
The fan requires little maintenance. Do not try to fix it by yourself. Consult qualified service personnel if service
is needed.
1. Before cleaning, make sure fan is disconnected from power source.
2. Keep vents at the rear of the motor housing clear from dust.
3. Do not allow water or any other liquid into the motor housing or interior parts.
1. Exterior plastic parts can be cleaned with a damp cloth or sponge lightly soaked with a
mild detergent. Do not use abrasive detergent or solvent to avoid scratching the surface.
Do not use gasoline, paint thinner, or other volatile chemicals to clean this fan.
2. Dry all parts completely before reassembling and reconnecting to power source.
5