Power Saving Mode - Anker 7 Serie Mode D'emploi

Powering Your Devices
AC charging
Press the AC button and connect your devices to the AC output ports.
USB charging
Connect your devices to the USB ports.
Car socket charging
Turn on the car socket and connect your devices to start charging.
on / o
on / o
on / o
03
on / o
on / o
on / o
Uninterruptible Power Supply (UPS)
To use the UPS function, connect your Power Station to a wall outlet with the AC charging cable, then press the
button and connect your devices via the AC output ports.

Power Saving Mode

Switching on the power saving mode prevents wasting power by automatically turning off the Power Station
once all your devices are fully charged.
Switching off the power saving mode will enable stable charging over an extended period, such as for time-
lapse photography or for sleeping with a CPAP machine.
Light
Ambient light
Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness
levels.
SOS mode
Press and hold the button for 2 seconds to turn on SOS mode.
on
on
on
on
on
on
on
on
o
o
o
o
x1 x1
x2
x1
x2
x1
x3
x2 x3
x2
x3
SOS
x3
SOS
2S
SOS 2S
SOS
2S
2S
04