Connecting The Adapter - Leap Frog Magic Adventures Globe Mode D'emploi

Connecting the Adapter

• Make sure the unit is turned Off.
• Connect the adapter to the Micro-USB Port of the unit.
• Plug the adapter into a power socket.
Note: The use of an adapter will override the batteries.
AC Adapter Safety
• The toy is not intended for children under 3 years old.
• As with all electrical products, precautions should be used and
observed during handling and use to prevent electric shock.
• Do not leave the toy plugged in for extended periods of time.
• As with all electrical products, precautions should be observed
during handling to prevent electric shock.
• Connecting an AC adapter to a wall outlet should only be
performed by an adult or a supervised child 8+ years of age.
• Never clean a plugged-in toy with liquid.
• Never use more than one adapter.
• The adapter is not a toy.
• If the USB cable is damaged, it cannot be used and must be
replaced with a recommended cable.
• Examine the power adapter periodically for conditions that may
result in the risk of fire, electric shock, or injury to persons (such
as damage to the output cord, pins, housing or other parts). In
the event of such conditions, the adapter should not be used
until properly repaired or replaced.
AC Adapter Electrical Ratings:
Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK or EU);
~ 240VAC, 50Hz (for AS/NZL)
Output: DC 5V, 1.5A, 7.5VA or DC 5V, 1A, 5VA
4