Table des Matières
Publicité
Réglage des freins
1. Détacher le bouchon de
sécurité.
2. Réglez la tension du frein
tenant la vis de réglage et en
dévissant ou en vissant le
bouchon de réglage selon la
tension désirée.
Kerb lifter
adjusted as the positon may cause a
little variation of the brake adjustment.
1. Adjust the brake with a 2mm Allen
wrench.
3. Vérifiez que les roues roulent
Insert the Allen wrench into the
normalement quand les freins
adjustment screw through the hole in
ne sont pas activés et
the front of the brake unit.
actionnez le frein parking pour
le tester. Répétez l'étape
2. The brake is tightened by turning the
numéro 2 au cas où la tension
adjustment screw clockwise (viewed
est trop forte ou pas assez
from the front) and loosened by
forte.
turning the adjustment screw
counter-clockwise (viewed from the
4. Serrez le bouchon de sécurité.
front).
Even though Carbon Ultralight is the
world's lightest walker and therefore
is easier to lift, it is equipped with a
kerb lifter that makes it easier to get
over smaller obstacles like kerbs and
low steps. This is particularly helpful
if heavy objects are transported in a
front-mounted basket or bag.
1. Carefully press on the kerb lifter with
a foot.
2. Pull sligthely by the handles to lift the
front wheels off the ground.
Be aware that the stability of
Carbon Ultralight changes when it
is reclined.
Be cautious and try to bypass
rather than climb high obstacles.
Publicité
Table des Matières
