General Notes; Connections To The Locomotive Controller; Technical Data; Overload Protection - LGB 51090 Mode D'emploi

2. General Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• LGB switched mode power packs may only be used with
products from the brands LGB.

3. Connections to the locomotive controller

Use only the switched mode power pack with a plug that fits
into your wall outlet.

4. Technical Data

See the specifications plate on the power pack.
Example:

5. Overload Protection

A built-in overload protection protects the switched mode
power pack from damage in the event of an overload or a
short circuit. The switched mode power pack turns itself off
and waits until the problem has been corrected. Do not try
to run any locomotive or control any turnout as long as the
problem is still present.

6. Examples LGB

Warning! Mount the power pack 51090 on a sturdy base.
7