Table des Matières
Publicité
STEP 9
1.
Attach upper assembled section to lower assembled section by inserting 4 cam bolts (A) into
cam lock holes on lower left side panel (13) and lower right side panel (14).
2.
Insert 4 cam locks (B) into cam lock holes on lower left side panel (13) and lower right side
panel (14), then rotate clockwise to secure cam bolts (A) in place.
STEP 10
1.
Attach upper back board (9) and middle back board (10) together by sliding into plastic
connection strip (O).
2.
Attach upper back board (9) and middle back board (10) to cabinet by inserting 12 screws (L)
through screw holes on upper back board (9) and middle back board (10), then tighten to
cabinet.
3.
Attach lower back board (11) to cabinet by inserting 12 screws (L) through holes on lower back
board (11), then tighten to cabinet.
1
L
9
L
O
3
10
L
L
L
11
L
L
14
12
B B
12
13
L
L
L
O
L
10
9
Publicité
Table des Matières
