Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.
Fastening the locking device onto the side of the locker. Depending on the locking device to be used, check the measurements
shown in designs 1.2 and 1.3. Checking the correct position of the locking device:
a.
Once the locking device has been tightened, check that the lock can be
opened and closed correctly with a user card. Once the locker door is
closed, check that the mechanical lock error alarm is not triggered.
1.4. PROCEDURE TO UNMOUNT THE LOCK
To unmount the lock from the locker door see NLX1 system manual.
NLX1_LOCK INSTALLATION AND ASSEMBLY
OJMAR 7
Publicité
Table des Matières
