CARVIN SHARKWAVE 1SHW-5-S1 Manuel Du Propriétaire page 12

CLOSING STRAINER NUT
1.INSERT
OPENING THE SPLASH COVER
1. DISENGAGING THE BASE
REMOVE THE SCREW AND THE
WASHER, SLIDE THE BASE BACKWARD
REMOVING THE BASE INTERLOCK
TABS.
DISASSEMBLING THE DIFFUSER
M22904232A
( gure 2)
ALIGN MARKERS OF THE NUT AND
STRAINER BODY AND INSERT.
( gure 3)
( gure 4)
INSERT A SMALL SCREW DRIVER
BETWEEN THE MOTOR BRACKET TWO
SNAPS. LIFT SLOWLY THE DIFFUSER'S
TAB TO RELEASE (REPEAT ON THE
OTHER SIDE)
DIFFUSER IS EQUIPPED WITH TWO
SCREW BOSS IN CASE THE TABS ARE
DAMAGED. USE (2X) NO.10-24 X 1''
316 STAINLESS STEEL SELF-TAPPING
SCREWS TO ATTACH DIFFUSER TO
MOTOR BRACKET.
WWW.CARVINPOOL.COM
2.ROTATE
2. UNLOCKING THE SPLASH COVER
TURN COUNTERCLOCKWISE
DISENGAGE THE SPLASH COVER'S
BAYONET. (TO RE-ENGAGE THE COVER
TURN CLOCKWISE
COMPRESSING THE O-RING)
COUNTERCLOCKWISE:
UNLOCK COVER
ALTERNATIVE SCREW BOSSES
ROTATE 1/4 TURN
CLOCKWISE TO LOCK
TO
WITHOUT
CLOCKWISE:
LOCK COVER
5