Troubleshooting - Chal-tec CAPITAL SPORTS Mode D'emploi

EN
28

TROUBLESHOOTING

Problem
Treadmill will not start.
Belt slips.
Belt hesitates when
stepped on.
Belt is not centred.
Possible cause
Treadmill not plugged in.
Safety Tether Key is not
correctly installed.
Circuit breaker in the
house has been tripped.
Treadmill circuit breaker
has been tripped.
Belt not tight enough.
Not enough lubrication
applied onto the running
deck.
Belt is too tight.
Running belt tension not
even across the rear roller.
Suggested solution
Plug the power cord into a
wall outlet.
Reinstall the Safety Tether
Key.
Reset the circuit breaker,
or call an electrician to
replace the circuit breaker.
Wait 5 minutes and then
try to restart the treadmill.
Adjust belt tension.
Apply lubricant.
Adjust belt tension.
Centre the belt.