Hathaway BG3404 Instructions D'assemblage page 4

THANK YOU! ASSEMBLY INSTRUCTIONS
1. Assemble base pole
sides to back base poles (B & D) as shown.
4. Spread the net (C) out to meet side and
back base poles (B & D), and...
8. Place net in the desired location and ensure
it is on level ground. Secure frame with included
ground stakes (F).
NOTE: Care should be taken when pressing in
the ground stakes. Base legs can be bent if
driven too far into the ground on hard surface.
NOTE: Net assembly must be used on a flat soft surface such as grass or soil to be anchored.
WARNING: Ensure frame is securely fixed to ground before use,
2. Connect two assembled base pieces
(B & D) together in middle using push button.
5. Connect net to base using hook and loop
straps around perimeter of net.
7. Lift up the front of the net (C), using the black tabs
in corners, and hook the tab over net pole (E) top ball
as shown while flexing pole. Attach bottom corners
of net (C) to front of base using loop hook as shown.
slide net sleeves (C) over base pole ends.
6. Insert bottom of assembled net poles (E)
into base poles (B & D) on each side
as shown.
as loose ground stakes may cause
3. Starting in front,
4
injury.