Set The Sleep Timer - GPO Rydell Radio Mode D'emploi

SCAN/ENTER button to confirm.
6. Back to alarm detail menu. Use the UP/DOWN button to select save
and press the AUTO
SCAN/ENTER to make the alarm setting is active.
Note: turn on the alarm1 function in the alarm detail menu.
Note: In alarm detail menu, you can set other alarm functions such as
alarm Off,alarm time,alarm Days,alarm Mode,alarm Last
listened,alarm,volume & alarm Save.
SHUT OFF CANCEL
To cancel the Alarm when it has activated. Press STANDBY button to
stop the alarm sound, the alarm will reset for next day.
TO TURN OFF THE ALARM COMPLETELY
Short Press the SLEEP/SNOOZE/ALARM button the press AUTO
SCAN/ENTER button repeatedly until to enter Alarm detail settings
mode, PRESS the UP/DOWN button to select alarm OFF then Press
AUTO SCAN/ENTER button to confirm.
SNOOZE FUNCTION
When the Alarm activates, Press the SLEEP/SNOOZE/ALARM button.
Then the alarm will turn off and will ring again 5 minutes later.

SET THE SLEEP TIMER

1. With the UNIT switched ON and playing any of the inputs i.e. DAB or
FM , Press and hold the SLEEP/SNOOZE/ALARM button until the
Sleep menu is shown.
2. The minutes are now flashing. Short Press SLEEP button to change
the Sleep time (such as 15mins, 30mins ,45mins, 60mins, 90mins)
3. Available Sleep time is 15 to 90 minutes, in 15 minutes increments.
Set the required time and short Press AUTO SCAN/ENTER button to
confirm.
4. The display will show the settings sleep time on the right upper
corner. The UNIT plays for the selected time and then switches to
Standby.
10
GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 10 GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 10
CA
1.
2.
SY
Sy
Al
di
m
1.
2.
3.
30/09/2021 14:18 30/09/2021 14:18