Safety; Personal Protective Equipment - Nitty-Gritty Clinox Eco Energy Manuel D'utilisation

2. SAFETY

The machine is constructed in compliance with established EU safety standards and bears the CE mark.
The CLINOX Eco Energy is a machine for the surface cleaning of stainless steel.
It can be employed with a high degree of safety on condition that all safety standards, common sense, manufacturer's
instructions and established legislation are observed. It is thus essential that the safety manager makes sure that his staff read
this manual before operating the machine.

2.1. PERSONAL PROTECTIVE EQUIPMENT

When using the machine, wear individual safety equipment, such as:

protective gloves;

protective goggles;

mask filtering (in the absence of smoke extraction system).
The treatments made with the machine must be carried out in well-ventilated areas to prevent operator exposure to fumes
that may be generated during processing. It is also recommended the use of appropriate personal protection equipment,
and if you were using the machine in enclosed spaces should be in place an adequate intake system.
P
REVENTION OF BURNS
During the work-process both the components
involved in the process and the torch can
reach temperatures (higher than 180° C).
Special protective gloves must be used
when you handle the stainless steel work
pieces and during the use of the torch.
Similar precautions must be followed in order
to replace the special pads and the inserts.
E
LECTROLYTIC SOLUTIONS
To operate this machine you have to use
electrolytic solutions called BOMAR, these
products are corrosive or irritating for eyes or
skin.
Adequate protective devices, such as
gloves, goggles and safety clothes, must
be worn during the use of the machine in
order to avoid direct contact.
Do not use products which are different from
the ones stated in this operating manual (in
case of use of other products any guarantee
will be invalidated) moreover do not mix
them with
electrolytes in a safe place and in the
original container.
In case of accidental contact with eyes or
skin or ingestion, please follow the
instructions stated on the safety data
sheets of the products. It is possible to
require a copy of safety data sheet to:
N -G
ITTY RITTY
phone: +39 059 785210
e-mail: info@nitty-gritty.it
other products. Keep
S. . .
R L
T
OXIC FUMES
Usually toxic fumes are generated during the
work processes: take precautions to prevent
exposure of the operator or other persons.
The machine does not have a proper
aspirating device, so always use the
machine with an adequate aspirating plant
in function.
In the absence or inability to provide the
work station of a smoke extraction
system, you can use an adequate filter
mask for the type of electrolyte used
(FFP2, FFP1......).


E
LECTRIC SHOCK
All electric shocks are potentially lethal. Do
not use the machine in humid places. Never
touch the live areas. Even in case of a light
feeling of electric shock, stop the cleaning
operations and do not use the unit until the
problem is found and solved by qualified
the
personnel. Frequently check the feeding
cable; if damage or cracking of the protective
covering of the supply cable are found,
replace it immediately. The maintenance of
the
performed only after disconnecting the
unit.
Any maintenance of electrical components
must
personnel.
Always replace any damaged parts of the
unit with original spare parts.
25
FFP2 (Tig Bomar, Brill Bomar)
FFP1 (Neutral Bomar)
electrical components
be performed only by
must be
qualified