Avtek FOLD Mode D'emploi page 18

18
AVTEK User Manual
7. Jake the folding legs out of the box and
unfold as shown in Fig. 1 6. and make sure
Fig. 16
the hinges click into place.
8. Once the legs are locked in place use
the hand screws to secure the support leg
to the vertical leg in an appropriate position.
The support leg can be adjusted to an
appropriate length. If the frame is attached
Fig. 17
to the legs higher up then the support
leg should also be attached higher
Fig. 18
up. (Fig. 1 7-19)
Fig. 19