Technical Specifications; Troubleshooting; Contact Details - DÜPERTHAL TEA-18 II ATEX H Manuel De L'utilisateur

D Ü P E R T H A L S i c h e r h e i t s t e c h n i k G m b H & C o . K G
Frankenstr. 3
63791 Karlstein, Germany
It is under the operator's responsibility to ensure proper monitoring of
the unit, to be sure it performs as intended.
The fan has to be checked at regular intervals. If it is dirty,
damaged or shows signs of corrosion, it has to be cleaned or
the defects have to be corrected, if needed by returning the
Important
blower box for repair to the seller or manufacturer.
4

Technical Specifications

Power Supply Voltage
Frequency
Current Rating
Motor Power
Revolutions
Fluid Velocity
Volume Flow Rate
Weight
Dimensions (enclosure edges) 260 x 290 x 275 mm
Ingress Protection
ATEX Rating
Values given for the exhaust airflow were determined without
subjecting the fan box to any load. When it is connected to a
storage cabinet, the velocity and the volume flow rate may differ,
Important
potentially substantially.
5

Troubleshooting

In the course of using the appliance, malfunctions may occur. The table
below is meant to help troubleshoot and correct malfunctions. If a mal-
function cannot be traced to one of the possible causes or the correc-
tion given does not solve the issue, then use of the appliance has to be
discontinued and it has to be returned for inspection and repair.
Malfunction Possible Cause
Appliance does not On/Off Switch
run
Power Supply
Cord
Overvoltage
Switch
6

Contact Details

Exclusive Sale:
Düperthal Sicherheitstechnik GmbH & Co. KG
Frankenstr. 3
63791 Karlstein, Germany
Web: www.dueperthal.com
Version January 2011
230 V
50 Hz
0.16 A (H model version)
0.17 A (L model version)
37 W (H model version)
40 W (L model version)
2600 /min (H model version)
1200 /min (L model version)
5.1 m/s (H model version)
4.3 m/s (L model version)
72 m³/h (H model version)
60 m³/h (L model version)
approx. 5.5 kg (H model version)
approx. 6.0 kg (L model version)
IP20
EX II (3) G [c II B T4]
Verification of Cause
· Is the appliance switched on at the On/Off
switch?
· Is the power supply cord damaged?
· Is the power supply cord properly
connected?
· Are the fuses inside the appliance o.k.?
Tel.: +49 6188 9139 0
Fax: +49 6188 9139 121
E-mail: info@dueperthal.com
2.00.339, 2.00.340 User's Manual
Correction of Malfunction
· Switch the appliance on at the On/Off
switch.
· Replace the supply cord with a new one.
· Connect the supply cord to the intended
socket.
· Replace the fuses (2 x 1.25 A slow blow).
7
EN