Vapium Summit+ Manuel D'instructions page 8

• With at least one solid battery LED lit, SUMMIT
can be used while recharging.
• Charging continues during use while plugged into USB.
• Press GO Button / adjust temperature anytime
during recharging.
Plug the micro USB connector into the
base and the other end into a USB port.
While recharging the battery level, White LEDs
will blink.
A solid White LED indicates current charge level.
Approximately 3h to full recharge.
• 4 White LEDs... • 4 White LEDs...
• 3 White LEDs... • 3 White LEDs...
• 2 White LEDs... • 2 White LEDs...
• 1 White LED... • 1 White LED...
75%+ 75%+ Battery Battery
50% 50% Battery Battery
15% 15% Battery (recharge) Battery (recharge)
5% 5% Battery (recharge) Battery (recharge)
+®
7