Removing The Battery For Disposal - Giubra Professional ZEROCUT STRONG Mode D'emploi Original

EN
WARNING!
To oil the blades, use only the supplied oil.
Do not use edible oil, cosmetic hair oil, oil mixed with other sub-
stances such as kerosene or other solvents as they could dama-
ge the blades and the appliance permanently.
The body of the device can be cleaned with a soft and slightly
damp cloth: before proceeding, always disconnect the charger
from the power
WARNING!
- Do not use chemicals or abrasives.
- Never immerse the body of the device and the battery charger
in water or other liquids.
- Only the blade block can be rinsed under the tap.

REMOVING THE BATTERY FOR DISPOSAL

At the end of the device's life cycle, it is essential to remove the
internal battery to dispose of them separately at the appropriate
collection centers.
To remove the internal battery proceed as follows:
• Run the appliance until it is completely drained.
• Unscrew and remove the three screws on the front of the de-
vice.
• Separate the two parts of the appliance body.
• Remove the battery located under the printed circuit.
• Reassemble the device by following the sequence indicated for
disassembly in reverse.
2343-booklet.indd 20 2343-booklet.indd 20
20
12/11/20 12:52 12/11/20 12:52