Belt Clip; Mounting Instructions - Nortel Networks M900 Guide Utilisateur

All manuals and user guides at all-guides.com

BELT CLIP

Mounting instructions

1• Clean all surfaces using a cloth
moistened with alcohol.
2• Remove the adhesive protection and
place it on the rear tab.
+
-
3• Position the tab on the mark on the
rear of the mobile above the loudspea-
ker holes. Press firmly.
4•Leave the tab on the mobile
for 72 hours before use.
Instructions for use
The clip is used to attach the mobile to
your belt.
1• Slide the tab into the clip to attach
the mobile.
Caution: the mobile must not be wed-
ged against your chair when you are sea-
ted.
2• To remove the mobile, press the
upper part of the clip and slide the
mobile upwards..
PAGE 38