Driving The Wheelchair With The Controller; Switching The Controller On Or Off; Driving The Wheelchair; Speed - Scout MOBILITY VR2 Manuel D'utilisation

All manuals and user guides at all-guides.com

2. Driving the wheelchair with the controller

2.1

Switching the controller on or off

To be able to drive or operate the electronic adjustment options of the wheelchair, the
controller must be switched on. Press the on/off button (B in figure 1.2).
2.2

Driving the wheelchair

Driving an electric wheelchair is done by operating a joystick. Move the joystick
forwards and the wheelchair will also move forwards. Steer left and right and the
wheelchair will turn.
2.3

Speed

The maximum speed can be controlled by the speed regulator on the controller (F1 en
F2 in figure 1.2). De maximum speed is displayed by the LED lights above the speed
regulators (D2 figure 1.2). Speed can be controlled with the joystick while driving. If the
joystick is moved a little, the wheelchair will move more slowly.

3. Operating the electrical adjustment options

Not every wheelchair has been equipped with electronic adjustment options. We make
a distinction between four different adjustment options to the seating system:
 Tilt adjustments
High/low adjustments

Backrest adjustments

 Legrest adjustments
To use electrical adjustment options, the VR2 Seats&Lights controller is required
(maximum of two options).
Figure 3.1 Electronic adjustment options
Driving the wheelchair with the controller
19