Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions for AlphaLUXX 25 / 40 / 60
4 Maintenance and troubleshooting
4.1
Inspection and maintenance schedule
Work to be carried out
Function test
Cleaning of cooling fins and front pane
4.2
Description of inspection and maintenance work
All of the functions of these lights should be maintained in accordance with the relevant provisions,
standards and regulations of the country in which they are being used, and in every case checked
by professionally trained personnel.
For the periodic repeat test, it is necessary to measure between the PE conductor and the power
supply housing during the protective conductor test!
4.3
Troubleshooting / remedying faults
Fault / error message
LED module does not light up
LED module is flickering
Safety glass is faulty
Hint
The light source for this light must only be replaced by the manufacturer or a service engineer com-
missioned by the manufacturer or a trained professional with equivalent qualifications.
Technical modifications and mistakes reserved.
These operating instructions are the property of GIFAS ELECTRIC GmbH and may not be copied,
translated, transmitted, duplicated or shared with third parties without the prior written consent of
GIFAS ELECTRIC GmbH.
Created
Edited
02/11/2016
21/07/2021
A.S.
A.S.
Timeframe / interval
In accordance with country-specific provisions / as required
According to level of dirt
Possible cause(s)
Power interruption
Error during installation of the
connecting cable
Power pack or LED module
faulty
Possibly loose connection of
the light
Power pack or LED module
faulty
Object ID
....
Remedy
Contact the manufacturer GIFAS or have the fault
investigated on site by a specialist.
Send the light in for inspection if necessary.
Contact the manufacturer GIFAS or have the fault
investigated on site by a specialist.
Send the light in for inspection if necessary.
Send the product in to GIFAS for repair.
Page 25 / 53
Publicité
Table des Matières
Dépannage
