Verifying Your Modem - Atlantis Land A01-PU3 Manuel

Depending on your system configurations you may be prompted for your
Windows 98 CDRom. Replace the installation CD with your Windows 98
CDRom and click OK. At the copying files dialog box, enter the path of your
windows CDRom (e.g. D:\Win98) and click OK.

1.8 Verifying Your Modem

•
From your Windows desktop, right-click on My Computer icon and
click Properties.
•
Click on the Hardware tab and then click Device Manager.
•
Double-click on the Modem device. You should see the Conexant
UCM92 Data Fax RTAM USB Modem is being listed. This means that
your modem driver is successfully installed. If you see a yellow
exclamation mark besides Conexant UCM92 Data Fax RTAM USB
Modem, it means that your driver is not installed successfully. Right-
click on the device and then uninstall the modem. Restart the system
and then install your modem driver again.
V.92 Features Setting
The V.92 Feature Setting application provides control over various V.92
features. When launched you will see the V.92 Feature tab.
This tab provides the ability to enable/disable Quick Connect as well as to
clear the Quick Connect memory. When you click on the Clear Data button
In order for the Quick Connect and V.44 features
to work, your ISP must support the V.92
protocol. In order for the Modem on Hold
features to work, your ISP must support the V.92
protocol and
provisioned with "call waiting". If your phone line
is also provisioned with "caller ID on call
waiting", then the modem can identify the caller
ID information of the incoming call while
connected to the V.92 ISP.
A01-PU3
your phone
ENGLISH
line must be
24