Klarstein QUICK COOK Mode D'emploi page 30

EN
30 30
Preparing the pressure cooker
1. Remove the inner pot (7) from the appliance housing.
2. Fill the inner pot with food and liquid, depending on the recipe. Use enough
food so that the inner pot is filled to at least the 1/5 mark inside the pot.
For foods that expand during cooking, such as beans or rice, you should fill
the pot to no more than the 3/5 mark. If you are cooking food that does not
expand, fill the pot to a maximum of the 4/5 mark inside the pot.
3. Ensure that the outside of the inner pot is clean. Then place it inside the
appliance housing.
4. Unless you are using the SAUTÉ programme, you must place the lid on the
appliance housing, then turn it counterclockwise to lock it in place.
5. Make sure the pressure limit valve (1) is in place with the needle pointing to
the right. Make sure that the float valve (3) is in the down position. Turn the
release valve needle (2) to the KEEP PRESSURE SETTING
6. Insert the mains plug of the appliance into a grounded socket. The control
panel turns on. The control panel shows "
standby mode.
.
", which means the appliance is in